|
|
BIO-FOAM Impression Material
A unique system for the taking of a three dimensional cast of shoeprints. Each
BIO-FOAM impression kit comes in a cardboard container which is suitable for
storage and will protect the impression.
Directions for use are simple. Press the footwear into the bio-foam and remove the
shoe. Spray the impressions with a separating agent i.e. hair spray. You now have
an impression that can be cast in the normal way.
Special Price:
£7.25
Add To Cart
|
|
|
Casting Frame - Plastic
12pcs Set
Adjustable plastic frame to contain plaster mixes required for either footwear or
tyre marks at the crime scene.
This rigid plastic frame comes complete with pre formed corners and straight
sections which are simply clipped together by the use of heavy duty press studs.
It is a versatile frame allowing you to shape the desired size of cast required.
Special Price:
£21.25
Add To Cart
|
|
|
|
|
|
Crownstone Casting Plaster - 1kg Handipack
1kg Handipack
The importance of a good footwear or tyre tread cast can be invaluable.
Before pouring any of the casting mixtures into the impressions we advise applying
a thin layer of snowprint wax (95230) or Unifix 16 (95231/2). This should be
carefully sprayed from a distance to cover the entire impression lightly. This
coating assists in slightly hardening the surface in an attempt to minimize possible
disturbance as material is poured into the substrate.
The 1kg handipack plastic bag technique means there is very little mess and no
clean up. The prepared and mixed casting material must not be poured directly
over all areas of the impression, but directed to one side only. Depending upon
environmental conditions the actual setting times vary from 20 minutes to about
1hour 45 minutes.
Also available in other pack sizes.
Mixing bowl (product code 95241 and spatulae product code 95251 not included)
Special Price:
£3.95
Add To Cart
|
|
|
|
Crownstone Casting Plaster - 25kgs
25kg Drum
The importance of a good footwear and tyre tread cast can be invaluable.
Before pouring any of the casting mixtures into the impressions we advise applying
a thin layer of snowprint wax (95230) or Unifix 16 (95231/2). This should be
carefully sprayed from a distance to cover the entire impression lightly. This
coating assists in slightly hardening the surface in an attempt to minimize possible
disturbance as material is poured into the substrate.
The 25kg drum is a very cost effective way of purchasing your casting powder.
Also available in 1kg Handipack and 5kg Tub.
Special Price:
£84.95
Add To Cart
|
|
|
|
|
|
Crownstone Casting Plaster - 5kg Tub
5kg Tub
The importance of a good footwear and tyre tread cast can be invaluable.
Before pouring any of the casting mixtures into the impressions we advise applying
a thin layer of snowprint wax (95230) or Unifix 16 (95231/2). This should be
carefully sprayed from a distance to cover the entire impression lightly. This
coating assists in slightly hardening the surface in an attempt to minimize possible
disturbance as material is poured into the substrate.
The 5kg tub allows you to mix up the desired quantity without waste especially if
you only have a partial mark.
Also available in 1kg Handipack and 25kg Drum.
Special Price:
£17.95
Add To Cart
|
|
|
|
CSI - Mixing Tips
CSI Forensic Impression Material Mixing Tips supplied in bags containing approximately 10 tips.
These tips ensure the correct mixing ratio of silicone and hardener and directs the putty to the area under analysis.
For use with product code 97163.
Special Price:
£5.25
Add To Cart
|
|
|
|
|
|
CSI Casting Kit
The CSI Casting Kit designed for the casting of tyre and footprint evidence, is
supplied in a co-polymer box which contains the following items:
Pre Measured amount of casting powder
Water Bottles
Rubber plaster mixing bowl
Rubber Casting Compound
Adjustable Casting Frame
Mixing Spatulas and spoon
Aerosol Fixative to stabilise print movement
Photographic Scale
Please note: As CSI are the manufacturer, we have the ability to custom make
these kits with the exact components that you require. Items can be added,
subtracted or exchanged according to customers requirements.
Please contact our sales offices for further details.
Special Price:
£94.95
Add To Cart
|
|
|
|
CSI Easy Mix Putty
A high definition polyvinyl siloxane impression material. Pre measured for quick
and easy usage at a crime scene.
Two x 20gm tins, one putty (Green) and one hardener (Grey) clearly labelled are
mixed together to give a good impression.
Special Price:
£5.45
Add To Cart
|
|
|
|
|
|
CSI Forensic Impression Material - Putty
Single Unit
Making imprints has never been so quick and easy to do. Brown colored CSI
Forensic Sil Putty has been specially formulated for use by Crime Scene
Investigators and Forensic examiners.
It is non-toxic, shrinkproof and gives great definition of toolmarks. CSI Forensic impression Material is a top class product which sets a new standard in the field of casting.
This product is extremely easy to use. The especially developed mixing tip
prevents air bubbles in the impression material and ensures a flawless dosage of
catalyst and casting putty. CSI Forensic impression Material allows you to accurately adjust
the amount of impression material to any situation and therefore prevents
unnecessary loss of material.
This product contains one third material more than you will find in conventional
tubes which makes it extremely cost effective.
Other colours (White & Clear) available on request.
To be used in conjunction with product code 97162 and 97164.
Special Price:
£20.70
Add To Cart
|
|
|
|
CSI Impression Material - Gun
This gun allows for the automatic mixing of silicone and hardener allowing it to be
dispensed easily and economically.
Please Note: This gun can only be used in conjunction with the CSI Forensic Impression Material product code 97163) found in this section.
Special Price:
£26.85
Add To Cart
|
|
|
|
|
|
Denstone Casting Plaster - 1kg
1kg Handipack
The importance of a good footwear and tyre tread cast can be invaluable.
Before pouring any of the casting mixtures into the impressions we advise applying
a thin layer of snowprint wax (95230) or Unifix 16 (95231/2). This should be
carefully sprayed from a distance to cover the entire impression lightly. This
coating assists in slightly hardening the surface in an attempt to minimize possible
disturbance as material is poured into the substrate.
The 1kg handipack plastic bag technique means there is very little mess and no
clean up. The prepared and mixed casting material must not be poured directly
over all areas of the impression, but directed to one side only. Depending upon
environmental conditions the actual setting times vary from 20 minutes to about
1hour 45 minutes.
Also available in other pack sizes.
Mixing bowl (product code 95241 and spatulae product code 95251 not included)
Special Price:
£2.75
Add To Cart
|
|
|
|
Denstone Casting Plaster - 25kg
25kg Drum
The importance of a good footwear and tyre tread cast can be invaluable.
Before pouring any of the casting mixtures into the impressions we advise applying
a thin layer of snowprint wax (95230) or Unifix 16 (95231/2). This should be
carefully sprayed from a distance to cover the entire impression lightly. This
coating assists in slightly hardening the surface in an attempt to minimize possible
disturbance as material is poured into the substrate.
The 25kg drum is a very cost effective way of purchasing your casting powder.
Also available in 1kg Handipack and 5kg Tub.
Special Price:
£45.50
Add To Cart
|
|
|
|
|
|
Denstone Casting Plaster - 5kg
5kg Tub
The importance of a good footwear and tyre tread cast can be invaluable.
Before pouring any of the casting mixtures into the impressions we advise applying
a thin layer of snowprint wax (95230) or Unifix 16 (95231/2). This should be
carefully sprayed from a distance to cover the entire impression lightly. This
coating assists in slightly hardening the surface in an attempt to minimize possible
disturbance as material is poured into the substrate.
The 5kg tub allows you to mix up the desired quantity without waste especially if
you only have a partial mark.
Also available in 1kg Handipack and 25kg Drum.
Special Price:
£10.95
Add To Cart
|
|
|
|
Mikrosil Impression Compound
200gm Pack
Mikrosil has been formulated to give excellent rendering of small details, highest
contrast for microscopical observations, good releasing ability and short setting
time.
Ideal for use on toolmarks, firing pin marks and dusted fingerprints where a regular
lifting tape will fail.
These properties are of special importance with shallow marks and those with
small details requiring large magnification. It is also suited for lifting developed
latent fingerprints from textured surfaces.
Setting times: 5-8 minutes at 68 degrees Fahrenheit 12-15 minutes at 14 degrees
Fahrenheit. The setting time can be shortened by increasing the amount of
hardener or lengthened by decreasing it. Do not add more than 6% hardener.
Squeeze out equal lengths of Mikrosil and hardener.
Special Price:
£21.95
Add To Cart
|
|
|
|
|
|
Mixing Bowl - Large
Flexible re-usable mixing container for use with CSI casting plasters. Even if the
plaster has hardened in the bowl, the plaster can be crushed for easy removal and
cleaning.
This mixing bowl has an internal diameter of 140mm and a depth of 110mm. (All
sizes approximate).
Also available in Small (product code 95240), Medium (product code 95241) and
Extra Large (product code 95243) sized bowls as shown in image.
Special Price:
£7.75
Add To Cart
|
|
|
|
Mixing Spatulae
A solid wooden handle and a stainless steel blade makes this and ideal instrument
for the mixing of impression and casting compounds.
Special Price:
£8.95
Add To Cart
|
|
|
|
|
|
Provil Cartridges
Twin Pack
Supplied as a 50ml Twin Pack - Medium Regular Set Vinyl Polysiloxane.
For use with Provil Gun dispenser. (See product code 95223).
Special Price:
£40.85
Add To Cart
|
|
|
|
Provil Gun
This gun allows for the automatic mixing of silicone and hardener allowing it to be
dispensed easily and economically.
Please Note: This gun can only be used in conjunction with the provil cartridges
(product code 95225) found in this section.
Special Price:
£26.85
Add To Cart
|
|
|
|
|
|
Provil Mixing Tips
Pack of 10pcs
Provil mixing tips supplied in bags containing approximately 10 tips.
These tips ensure the correct mixing ratio of silicone and hardener and directs the
putty to the area under analysis.
For use with product code 95225.
Special Price:
£5.25
Add To Cart
|
|
|
|
Provil Putty
Twin Pack
2 x 450ml Tubs of Provil novo silicones are high quality impression materials used
for making replicas for surface testing.
Boxed and includes 2 colour coded dispensing spoons.
Supplied as base (colour-green) and catalyst compositions (colour-grey) and can
be mixed or kneaded manually in a 1:1 ratio.
All Provil novo articles excel in their highly accurate reproduction of surface detail
for reproducing toolmarks.
Perfect dimensional stability and resistance to deformation. -
Total Mixing time: 45 seconds. Total Working time: 2 minutes. From start of
mixing to setting time: 5 mins.
Setting times can be affected by temperature.
Putty in accordance with EN 24823.
Special Price:
£105.95
Add To Cart
|
|
|
|
|
|
Unifix
400ml Aerosol Spray
A specially formulated spray for the permanent fixation of powdered fingerprints on
paper etc.
Burned and shrivelled documents can be restored and flattened again for further
inspection.
Please note: This product is classed as hazardous for airfreight and will therefore
incur extra charges if shipped outside the United Kingdom.
Special Price:
£19.95
Add To Cart
|
|
|
|
Xantopren Impression Compound
140ml Blue
Often there is only one opportunity to record a piece of physical evidence i.e.
footprint/tyreprints/toolmarks and it is vitally important that you are able to match
the impression with the actual object making the impression.
CSI have a selection of materials for the recording of physical evidence at crime
scenes which is based upon the experience of serving crime scene investigators.
This product is a light bodied, low consistency, silicone based impression
material. Its light blue colour is ideal when being photographed.
Total working time 1 min 30 secs including mixing of 30 seconds. Setting time 5
minutes in normal conditions.
Activator is included in our price.
Special Price:
£37.75
Add To Cart
|
|
|