|
|
Amido Black
25gm
Amido black is a dye which stains protein present in blood and other body
fluids to give a blue-black product. It will not detect the normal constituents of
latent fingerprints and therefore must be used in sequence with other techniques
when blood-contaminated latent fingerprints are examined. It is also absorbed
by some porous surfaces and may produce a high background colour.
Effective on porous and non porous surfaces paper, heavy cardboard, rubber
gloves, plain wood, polythene etc. Good results have also been obtained on
cadavers.
Care should be taken when dealing with porous substrates as the dye may be
absorbed.
It is recommended that photographs be taken of the bloodstains before treatment
with Amido Black.
Special Price:
£10.95
Add To Cart
|
|
|
Ardox Flourescent Dye
1lt
Ardrox is a fluorescent liquid dye which works well with lasers, forensic light
sources and even UV lamps.
Ardrox can be used full strength or diluted with either Methanol or Ethanol.
Although Ardrox developed prints fluoresce under 365nm , better results
have been reported while examining evidence with 450 - 480nm light.
Special Price:
£26.95
Add To Cart
|
|
|
|
|
|
Basic Yellow
25gm
A fluorescing dye stain which can be used for improving superglue developed
fingerprints.
Basic Yellow 40 (Panacryl brilliant flavine) has been found to be one of the most
sensitive stains and fluoresces well between 365nm and 485nm.
Special Price:
£10.95
Add To Cart
|
|
|
|
Fingerprint Developer - HotShots
Individually Packed.
Developed from the U.S. military's heat and eat ration concept, you can now have super-glue fuming in one convenient, disposable container without the sticky mess!
Within a few seconds, the activator solution is absorbed and a chemical reaction takes place, generating heat and a controlled amount of steam needed for
humidity. As the canister heats up the HotShot fingerprint developer begins to
vaporise and fills the fuming chamber with extremely sensitive, active print
developing fumes.
Developed prints are whiter and appear much faster due to the activator and the
concentrated print developer. One HotShot adequately fumes a tank in four
minutes or less.
Each HotShot is self-contained and disposable so there is no mess to clean up.
After use simply screw the lid back on the protective container and throw the unit
away.
Simple to use and ideal for training purposes.
Special Price:
£5.15
Add To Cart
|
|
|
|
|
|
Forensic Adhesive Neutraliser
25ml
This product is ideal for removing adhesive tapes, labels, stickers, postage stamps
etc from a variety of surfaces thereby allowing you to use conventional methods to
process the adhesive side of the tape in order to look for fingerprints.
Used in accordance with the instructions, you can safely remove objects without
damaging the adhesive. The product then evaporates quickly leaving the adhesive
ready for developing with further processes such as stickyside powder or Wetwop.
Forensic Adhesive Neutraliser does not destroy DNA.
Product sold individually.
Special Price:
£4.35
Add To Cart
|
|
|
|
Gentian Violet Powder
25gm
Gentian Violet is a dye which stains the fatty constituents of sebaceous sweat
producing an intense purple image.
It is very effective for the development of latent fingerprints on the adhesive
surface of adhesive tape and decorative or protective films.
It will also develop fingerprints on some other surfaces, particularly those
contaminated with oils and grease. Also effective on small non-porous surfaces
such as crockery.
However it can interfere with other forensic examination such as handwriting, ink,
paper and indented writing impressions, body fluids including DNA profiling, fibres,
hairs and paint.
This reagent is easy to use but please note that this product is toxic by swallowing
or skin absorptions and should therefore NOT be used in large quantities.
Special Price:
£10.95
Add To Cart
|
|
|
|
|
|
Ninhydrin Aerosol Spray
250ml Spray
Ninhydrin is a very effective reagent for paper and some other porous surfaces. It
reacts with amino acids and possibly some other components in fingerprints. It
produces visible latent fingerprints on surfaces such as cheques, paper
documents, bank notes etc.
Simple to use and cost effective as it does not require any additional light sources
for examination. Reacts with blood and may be used for developing blood
contaminated fingerprints. If used after DFO additional fingerprints may be
developed.
Ninhydrin can be used to develop blood contaminated fingerprints on porous and
non-porous surfaces. Fingerprints developed with ninhydrin can be made
fluorescent by application of zinc chloride.
Special Price:
£75.00
Add To Cart
|
|
|
|
Ninhydrin Crystals 100gm
100gm
Ninhydrin is a very effective reagent for paper and some other porous surfaces. It
reacts with amino acids and possibly some other components in fingerprints. It
produces visible latent fingerprints on surfaces such as cheques, paper
documents, bank notes etc.
Simple to use and cost effective as it does not require any additional light sources
for examination. Reacts with blood and may be used for developing blood
contaminated fingerprints. If used after DFO additional fingerprints may be
developed.
Ninhydrin can be used to develop blood contaminated fingerprints on porous and
non-porous surfaces. Fingerprints developed with ninhydrin can be made
fluorescent by application of zinc chloride.
Mixing ninhydrin crystals in Methanol and Petroleum Ether is very economical as
3.8 grams of crystals produce 2 litres of solution and the shelf life is indefinite.
Special Price:
£57.95
Add To Cart
|
|
|
|
|
|
Ninhydrin Crystals 25gm
25gm
Ninhydrin is a very effective reagent for paper and some other porous surfaces. It
reacts with amino acids and possibly some other components in fingerprints. It
produces visible latent fingerprints on surfaces such as cheques, paper
documents, bank notes etc.
Simple to use and cost effective as it does not require any additional light sources
for examination. Reacts with blood and may be used for developing blood
contaminated fingerprints. If used after DFO additional fingerprints may be
developed.
Ninhydrin can be used to develop blood contaminated fingerprints on porous and
non-porous surfaces. Fingerprints developed with ninhydrin can be made
fluorescent by application of zinc chloride.
Mixing ninhydrin crystals in Methanol and Petroleum Ether is very economical as
3.8 grams of crystals produce 2 litres of solution and the shelf life is indefinite.
Special Price:
£17.75
Add To Cart
|
|
|
|
PhotoFlo 2000
1ltr
For use with Sticky-Side powder (product code 95340) which in turn is used for
developing fingerprints on the adhesive side of most tapes and labels.
Basically PhotoFlo 2000 is added to water and sticky-side powder to form a paste.
Special Price:
£21.95
Add To Cart
|
|
|
|
|
|
Rhodamine 6G
25gm
Rhodamine 6G is a very good laser or forensic light source dye.
Its best used on metal, glass, leather plastic and other objects to be used in
conjunction with a Forensic Light Source.
However caution coupled with good protective clothing is strongly recommended
when using this product, because of its possible carcinogenicity.
Special Price:
£16.75
Add To Cart
|
|
|
|
SPR - Self Mix Powder
25gms
Small particle reagent is a suspension of fine molybdenum disulphide particles
in detergent solution.
It adheres to the fatty constituents of latent fingerprints to form a grey deposit
and is a quick and simple process.
The dish application method is a reasonably sensitive process but is very
much more effective on fresh fingerprints than older ones.
The spray application (see product code 95333) is considerably less effective and
should be considered only when no alternative is feasible.
The grey powder may be lifted to simplify photography.
Special Price:
£14.95
Add To Cart
|
|
|
|
|
|
SPR Pump Action Spray
450ml
Small particle reagent is a suspension of fine molybdenum disulphide particles
in detergent solution.
It adheres to the fatty constituents of latent fingerprints to form a grey deposit
and is a quick and simple process.
This spray application is considerably less effective than the regular dish
development technique, but it does have its place when that alternative is not
always feasible.
For example this application is ideally suited for use on damp motor vehicles.
The grey powder may be lifted to simplify photography.
Special Price:
£16.75
Add To Cart
|
|
|
|
Stickyside Powder 25gm
25gm Tub
A powder for developing fingerprints on the adhesive side of most tapes and labels.
i.e. packing tape, masking tape, ducting tape, plasters and packing labels etc.
Powder should be mixed with PhotoFlo 2000 (see product code 95339) and water
and then applied to the tape using a softhair brush such as our camel hair brush,
product code 95123.
Can be used as a replacement to Gentian Violet and superglue although the latter
is a far superior process.
Special Price:
£20.50
Add To Cart
|
|
|
|
|
|
Sudan Black
25gm
Sudan Black is a dye which stains fatty components of sebaceous sweat to
produce a blue-black image. The formulation contains solid particles of dye as well
as dye in solution.
It is less sensitive than some other processes for latent print detection but is of
particular use on surfaces which are contaminated with grease, foodstuffs or dried
deposits of soft drinks.
It will also enhance superglue developed fingerprints.
Special Price:
£32.45
Add To Cart
|
|
|
|
Superglue - Hard Evidence 25gm
25gm
Superglue vapour, ethyl cyanoacrylate, polymerises on some latent fingerprints to
produce a white deposit. This polymerisation is thought to be catalysed by water
and possibly some other constituents of latent fingerprints. The effectiveness of the
process is very dependent on the processing conditions.
There are a number of manufacturers selling Superglue in different forms under
different names however CSI only sell authentic Loctite Hard Evidence liquid
glue as in our opinion this formulation is still the best.
Because of the hazards associated with Superglue we would always recommend
its use in a fuming chamber. (See product code 97051 CSI Forensic Fingerprint
Cabinet).
To prolong the shelf life of this product we suggest storing it in a refrigerator.
Special Price:
£8.65
Add To Cart
|
|
|
|
|
|
Superglue - Hard Evidence 454gm
454gm
Superglue vapour, ethyl cyanoacrylate, polymerises on some latent
fingerprints to produce a white deposit. This polymerisation is thought to
be catalysed by water and possibly some other constituents of latent fingerprints.
The effectiveness of the process is very dependent on the processing conditions.
There are a number of manufacturers selling Superglue in different forms
under different names however CSI only sell authentic Loctite Hard Evidence liquid
glue as in our opinion this formulation is still the best.
Because of the hazards associated with Superglue we would always recommend
its use in a fuming chamber. (See product code 97051 CSI Forensic Fingerprint
Cabinet).
To prolong the shelf life of this product we suggest storing it in a refrigerator.
Special Price:
£74.50
Add To Cart
|
|
|
|
Superglue - Hard Evidence Pouches 100pk
100pk
Authentic Loctite Hard Evidence liquid glue in pouch form.
Superglue fuming polymerises with the residues in latent prints to produce a white
deposit on a range of surfaces.
The effectiveness of this process will depend upon the age of the fingerprint and the
processing conditions.
Pouches are ideal when processing crime scenes in the field contained within a
portable fuming chamber and ideal for fuming car interiors.
To prolong the shelf life of this product we suggest storing it in a refrigerator.
Special Price:
£359.95
Add To Cart
|
|
|
|
|
|
Superglue - Hard Evidence Pouches 20pk
20pk
Authentic Loctite Hard Evidence liquid glue in pouch form.
Superglue fuming polymerises with the residues in latent prints to produce a white
deposit on a range of surfaces.
The effectiveness of this process will depend upon the age of the fingerprint and the
processing conditions.
Pouches are ideal when processing crime scenes in the field contained within a
portable fuming chamber and ideal for fuming car interiors.
To prolong the shelf life of this product we suggest storing it in a refrigerator.
Special Price:
£80.50
Add To Cart
|
|
|
|
Superglue - Hard Evidence Pouches 5pk
5pk
Authentic Loctite Hard Evidence liquid glue in pouch form.
Superglue fuming polymerises with the residues in latent prints to produce a white
deposit on a range of surfaces.
The effectiveness of this process will depend upon the age of the fingerprint and the
processing conditions.
Pouches are ideal when processing crime scenes in the field contained within a
portable fuming chamber and ideal for fuming car interiors.
To prolong the shelf life of this product we suggest storing it in a refrigerator.
Special Price:
£24.95
Add To Cart
|
|
|
|
|
|
Superglue Cleaning Solvent
1ltr
Used to remove any build up of white residue deposits inside fuming chambers
and from treated evidence.
Please note this chemical solvent may damage plastics and painted surfaces.
Special Price:
£17.75
Add To Cart
|
|
|
|
Superglue 'Cleanup' Sticks
100pk
Superglue vapour, ethyl cyanoacrylate, polymerises on some latent fingerprints to
produce a white deposit. This polymerisation is thought to be catalysed by water
and possibly some other constituents of latent fingerprints. The effectiveness of the
process is very dependent on the processing conditions.
However where ‘overfuming’ or 'overcooking' has occurred it may be possible to
retrieve the mark with these specially formulated 'cleanup' sticks.
Using these unique patented 'cleanup' sticks it is possible to recover a mark
and therefore aid its identification.
Supplied in packs of 100 they have an unlimited shelf life so it's worth having a
pack in the laboratory just in case.
Special Price:
£13.45
Add To Cart
|
|
|
|
|
|
Superglue Foil Dishes
Pack of 100
Superglue vapour, ethyl cyanoacrylate, polymerises on some latent fingerprints to
produce a white deposit. This polymerisation is thought to be catalysed by water
and possibly some other constituents of latent fingerprints. The effectiveness of the
process is very dependent on the processing conditions.
These small foil dishes are ideally suited for heating up the superglue thereby
allowing the vapour to permeate the exhibits.
Supplied in boxes of 100.
Special Price:
£16.95
Add To Cart
|
|
|
|
Superglue Heater 240V
Superglue vapour, ethyl cyanoacrylate, polymerises on some latent fingerprints to
produce a white deposit. This polymerisation is thought to be catalysed by water
and possibly some other constituents of latent fingerprints. The effectiveness of the
process is very dependent on the processing conditions.
This unit is ideal for the acceleration of the fuming process by heating up the
superglue.
Should be used with product code 97078, Superglue foil dishes.
Special Price:
£110.95
Add To Cart
|
|
|
|
|
|
Superglue 'Portable' Fuming Chamber
A collapsible 12” x 12” x 19” clear perspex chamber which can be used in the field.
Hinged joints are secured with Velcro fastenings.
Comes complete with carrying case.
For heating units see product codes 95319 and 95325.
Special Price:
£146.95
Add To Cart
|
|
|
|
Superglue Softener
250ml
A ready-made chemical solution used to clean off superglue should it come in
contact with the skin.
Special Price:
£18.95
Add To Cart
|
|
|
|
|
|
Wetwop Powder - Black
250ml
For developing latent prints on the adhesive side of tape.
Wetwop comes as a premixed solution and is applied to the surface with a soft
hair brush.
Can be used on the following tapes: masking, duct clear cellophane, brown
packaging and nylon reinforced strapping.
For an alternative contrast see product code 95349 Wetwop Powder - White
Special Price:
£42.85
Add To Cart
|
|
|
|
Wetwop Powder - White
250ml
For developing latent prints on the adhesive side of tape.
Wetwop comes as a premixed solution and is applied to the surface with a soft
hair brush.
Can be used on the following tapes: masking, duct clear cellophane, brown
packaging and nylon reinforced strapping.
For an alternative contrast see product code 95348 Wetwop Powder - Black
Special Price:
£42.85
Add To Cart
|
|
|